När det börjar strula kan det gå troll i det som ni vet och nu e jag så sjukt trött på det här...

Jag har en VU+ solo och har OpenPLI ver 4 på den.
Jag vill ha in IPTV och försökte på olika sätt men utan att lyckas. Kanske hänger problemen ihop (men risk för SBS).

I alla fall laddade jag en USB-sticka med uppgradering till ver 7.2 från openpli.org.
Formaterade ett nytt USB och satt in. Startade sen om mottagaren. Inget hände... Samma ver 4 kom upp igen?

Sen har jag provat i princip allt. Andra USB-stickor, provat ver 6.2 och även 4.0 bara för att testa.
Inget hjälper. Den vill verkligen inte flasha från USBstickan...
Och ja, jag har gjort exakt så som beskrivs här (men det står ju fel nedan i katalogen som ska vara vuplus/solo)och jag har inga andra stickor i varken fram eller bak:

How to upgrade the Vu+ Solo image via USB

Save the image on the PC (USB version)
Unzip files
Format USB flash drive with the file system FAT,or FAT32
Create on the stick : Directory/vuplus/duo
Copy to the stick the 3 files into irectory/vuplus/duo
Power off VU+ STB
Remove all USB devices from the box
Plug-in the USB Stick into Vu+ Box
Turn on the VU+ STB
Firmware Update will start automatically -NEJ
The Standby LED will be red and if the USB stick detected ,the LEDs lights up -NEJ
If the Standby LED is green, the flashing process is finished, then you can unplug the USB stick from the box -Den blir grön i princip direkt jag slår på ström...
Power off the VU+ STB , and restart it again

Nån som kan hjälpa en vilsen själ...?

/Gary