Yes, man måste trycka på on/standby på framsidan.
Flashing the Receiver.
– Fully power the receiver down via the rocker switch at the rear of the receiver.
– Make sure no USB devices are plugged into the receiver at this point.
– Insert the USB stick containing the image files into one of the USB ports on the receiver.
– Power the receiver on from the rear rocker switch and await instructions.
– As your Duo2 starts to power up you should see a prompt on the receivers display askingyou to press the power button, at this point you need to press the power button which islocated behind the flap on the front of the receiver.
Svara med citat
