DM 600 PVR och Irdeto

**cue** · 2007-12-27, 21:10

Hur kan jag få min orginalkort (irdeto 2) att läsas via kortläsaren som finns på dreamboxen? jag har flashat om den med GP image och tankat ner newcamd men bilden blir svart, men de funkar i min andra box (ej DM) med irdeto module :errf:

**deas** · 2007-12-29, 09:49

Ta bort Newcamd från boxen och prova installera Camd3 via bluepanel och testa...

**cue** · 2007-12-30, 20:47

tja,
tack för svaret! jag testade de men de funkade inte heller

testade att starta allt manuelt via putty prompt:
root@dm600pvr:/usr/script> ./camd3.893_cam.sh start
[SCRIPT] start: Camd3.893
root@dm600pvr:/usr/script> 30.12.2007 20:29:49 camd3: BOXTYPE: dm600
30.12.2007 20:29:49 camd3: LOG: 2
30.12.2007 20:29:49 camd3: UDP_PORT: 24110
30.12.2007 20:29:49 camd3: HTTP_PORT: 9080
30.12.2007 20:29:49 camd3: DNS_CACHE: 60 sec
30.12.2007 20:29:49 camd3: camd3.map not found
30.12.2007 20:29:49 camd3: camd3.ignore not found
30.12.2007 20:29:49 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any SERVICES=all
30.12.2007 20:29:49 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=any SERVICES=1702:000000:0008,1722:000000:0008,
30.12.2007 20:29:49 camd3: UserDB(update): USER=benutzer110 PASS=password10 FROM=any SERVICES=1702:000000:0008,1722:000000:0008,
30.12.2007 20:29:49 camd3: error parse line #38 in camd3.keys
30.12.2007 20:29:49 camd3: error parse line #39 in camd3.keys
30.12.2007 20:29:49 camd3: error parse line #40 in camd3.keys
30.12.2007 20:29:49 camd3: error parse line #41 in camd3.keys
30.12.2007 20:29:49 camd3: error parse line #42 in camd3.keys
30.12.2007 20:29:49 camd3: error parse line #43 in camd3.keys
30.12.2007 20:29:49 camd3: error parse line #44 in camd3.keys
30.12.2007 20:29:49 camd3: KeyDB: started
30.12.2007 20:29:49 camd3: HTTP: started on port 9080
30.12.2007 20:29:50 camd3: slot 127.0.0.1:34000 -> init...
30.12.2007 20:29:50 camd3: slot 127.0.0.1:34000 monitor start...
30.12.2007 20:29:50 camd3: slot 127.0.0.1:34000 -> Operation now in progress
30.12.2007 20:29:50 camd3: camd v3.893 - erfolgreich gestartet
30.12.2007 20:29:51 camd3: slot 127.0.0.1:34000 -> Operation now in progress
30.12.2007 20:29:52 camd3: slot 127.0.0.1:34000 -> Operation now in progress
30.12.2007 20:29:53 camd3: slot 127.0.0.1:34000 -> Operation now in progress

testade även så här:
http://www.dreambox.it/faq_ENG_emu_newcs_camd3.htm

log camd + newcs
---
[SCRIPT] stop: Camd3.893/NewCS-1.30
[SCRIPT] stop: Camd3.893/NewCS-1.30
[SCRIPT] start: Camd3.893/NewCS-1.30
30.12.2007 19:46:56 camd3: BOXTYPE: dm600
30.12.2007 19:46:56 camd3: LOG: 2
30.12.2007 19:46:56 camd3: UDP_PORT: 24110
30.12.2007 19:46:56 camd3: HTTP_PORT: 9080
30.12.2007 19:46:56 camd3: DNS_CACHE: 60 sec
30.12.2007 19:46:56 camd3: camd3.map not found
30.12.2007 19:46:56 camd3: camd3.ignore not found
30.12.2007 19:46:56 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any SERVICES=all
30.12.2007 19:46:56 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=any SERVICES=1702:000000:0008,1722:000000:0008,
30.12.2007 19:46:56 camd3: UserDB(update): USER=benutzer110 PASS=password10 FROM=any SERVICES=1702:000000:0008,1722:000000:0008,
30.12.2007 19:46:56 camd3: error parse line #38 in camd3.keys
30.12.2007 19:46:56 camd3: error parse line #39 in camd3.keys
30.12.2007 19:46:56 camd3: error parse line #40 in camd3.keys
30.12.2007 19:46:56 camd3: error parse line #41 in camd3.keys
30.12.2007 19:46:56 camd3: error parse line #42 in camd3.keys
30.12.2007 19:46:56 camd3: error parse line #43 in camd3.keys
30.12.2007 19:46:56 camd3: error parse line #44 in camd3.keys
30.12.2007 19:46:56 camd3: error parse line #52 in camd3.keys
30.12.2007 19:46:56 camd3: KeyDB: started
30.12.2007 19:46:56 camd3: HTTP: started on port 9080
30.12.2007 19:46:56 camd3: slot 127.0.0.1:34000 -> init...
30.12.2007 19:46:56 camd3: slot 127.0.0.1:34000 monitor start...
30.12.2007 19:46:56 camd3: slot 127.0.0.1:34000 -> Operation now in progress
30.12.2007 19:46:56 camd3: camd v3.893 - erfolgreich gestartet
30.12.2007 19:46:57 camd3: slot 127.0.0.1:34000 -> Operation now in progress
30.12.2007 19:46:58 camd3: slot 127.0.0.1:34000 -> Operation now in progress
30.12.2007 19:46:59 camd3: slot 127.0.0.1:34000 -> Operation now in progress
30.12.2007 19:47:04 camd3: slot 127.0.0.1:34000 -> Operation now in progress

kan UCAS:en vara paj?? hur kan man verifiera att den funkar?

**viairdeto** · 2007-12-31, 00:38

Irdeto-kort ver.2 fungerar endast med newcs v1.17-1.19 +mgcamd (oavsett version), eller newcamd/cardsever. På cardserver får du dock byta den default COM port som finns i dess config-fil, eftersom den pekar mot port COM port 1, men för interna kortläsaren så bör det vara:
SERIAL_PORT = 0
Jag får det inte att fungera med SERIAL_PORT = 1, fastän exemplet i cardserv.cfg säger att interna läsaren i DM500 är 1.

**cue** · 2008-01-01, 22:40

Nu fanns inte newcs 1.17 på min DM så jag körde 1.5 och mgcamd 1.27

jag körde scriptet via CLI och fick ut följande:

Kod:

[SCRIPT] start: MgCamd 1.27/NewCS 1.50
This is NewCS 1.50 - the New CardServer by Butter-team..
Compiled on Oct 26 2007 at 16:30:58
Reading Config file from /var/tuxbox/config/newcs.xml
No certificate specified in config, trying to look in current dir..
No certificate found, dependencies will be disabled..
[ 23:21:03 ] [ Box detect ] Box type 2
[ 23:21:03 ] [ Config ] Enabling SSL engine
[ 23:21:03 ] [ Config ] SSL engine disabled due to Certificate errors
[ 23:21:03 ] [ Config ] Value in <ipk> for device 0 (lower) is INVALID, skipping...
[ 23:21:03 ] [ Config ] Value in <ucpk> for device 0 (lower) is INVALID, skipping...
[ 23:21:03 ] [ Config ] Pincode for device 0 (lower): 0000
[ 23:21:03 ] [ Config ] /dev/sci0 ECM priority: round
[ 23:21:03 ] [ Config ] Option <cache> not present, defaulting EMM: 20, ECM: Dynamic
[ 23:21:09 ] [ NewCS ] Ready to GO! :)
tuxbox mgcamd v1.27b by mixvt (compiled Dec 31 2007 16:49:33)
[mg] Net:1:7:0:5s Show ecm:1, emm:1 Up:1 Au:2 Dir:0 Osd:no:80:0 Cache:7 Log:2:no ip:28007 Reread:0
[mg] Ecm cache time: 15
Box type: dreambox
Conax.Key error 2: No such file or directory
SoftCam.Key error 2: No such file or directory
AutoRoll.Key error 2: No such file or directory
Conax.Key error 2: No such file or directory
[config] newcamd route = test:127.0.0.1:34000 server newcs
newcamd keep alive: 300, incoming port: 21000
[mgcam] emm thread started
[mgcamd] tps update started.
[newcamd] Connecting to 127.0.0.1:34000...
[newcamd] Connection to 127.0.0.1:34000 failed (48ms)
got 54 cmd 9F
[mg0] namespace 820000 t-id 22C4 on-id 13E
[mg0] descramble on 1, source 1
[mg0] service 2980 index 0 pmt pid 392 (1)
 ECM: CaID: 0x0608  -> CaPID: 0x053F ProvID: 000000
[mg0] No irdeto key(s) found for id 0 keynr 00
[mg0] network can't decode
[mg0] pid 0x053F failed to decode.
[mgcamd] emm started
*EMM: CaID: 0x0500  -> CaPID: 0x03E9 ProvID: 000000
 EMM: CaID: 0x0B00  -> CaPID: 0x0100 ProvID: 000000
 EMM: CaID: 0x0608  -> CaPID: 0x0510 ProvID: 000000
 EMM: CaID: 0x0604  -> CaPID: 0x0520 ProvID: 000000
[mg0] stoping camd..
[mgcamd] emm stopped
got 54 cmd 9F
[mg0] namespace 820000 t-id 22C4 on-id 13E
[mg0] descramble on 1, source 1
[mg0] service 2980 index 0 pmt pid 392 (2)
 ECM: CaID: 0x0608  -> CaPID: 0x053F ProvID: 000000
[mg0] No irdeto key(s) found for id 0 keynr 00
[mg0] network can't decode
[mg0] pid 0x053F failed to decode.

Newcs.xml

Kod:

<newCSconfig>
        <readers name="Card Readers">
                <device>
                        <name>lower</name>
                        <type>sci</type>
                        <mhz>600</mhz>
                        <node>/dev/sci0</node>
                        <parity>odd</parity>
                        <reset>normal</reset>
                        <export>Yes</export>
                        <enabled>Yes</enabled>
                        <blocksa>No</blocksa>
                        <blockua>No</blockua>
                        <blockga>No</blockga>
                        <!-- <boxkey>0000000000</boxkey>  -->
                        <!-- <rsa>0000000000</rsa> -->
                        <irdeto-camkey>0000000000000000</irdeto-camkey>
                        <irdeto-camkey-data>00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
                        <crypto-special>No</crypto-special>
                        <ipk>00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
                        <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
                        <PTShandshake>No</PTShandshake>
                        <carddetect>No</carddetect>
                        <newcamd_port>34000</newcamd_port>
                        <autosid>Yes</autosid>
                        <Seca-PPV>no</Seca-PPV>
                        <pincode>0000</pincode>
                        <priority>round</priority>
                </device>
....
<newcamdserver>
                        <enabled>Yes</enabled>
                        <name>newcs</name>
                        <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
                        <user>
                                <name>test</name>
                                <password>test</password>
                                <hostname>127.0.0.1</hostname>
                                <port>12000</port>
                                <au>on</au>
                                <sidoverride>off</sidoverride>
                                <spider>No</spider>
        <rate>2</rate>
                        </user>
        </newcamdserver>
</newCSconfig>

newcamd.list är också editerad men de kanske inte behövs här

Jag har ett orginalkort i men den verkar inte kunna läsa ut nycklarna som jag ser de.. eller?

**viairdeto** · 2008-01-02, 22:46

Det är bättre att du startar newcs manuellt, istället för med script !
Problemet med de nya versionerna av newcs är att de fungerar som de skall, men av någon anledning står det alltid:
[mg0] failed to decode.

Pröva med newcs 1.17-1.19 (byt ut binärfilen). Fösök att hitta den genom google eller på dreaboxedit. Ersätt binärfilen med ett FTP-program och ge samma rättigheter till filen. Kör om scriptet sedan och kortet borde fungera !

Ämne: DM 600 PVR och Irdeto

Ämnesverktyg

Sök ämne

Visa

DM 600 PVR och Irdeto

Liknande ämnen

irdeto 2

Irdeto 2

irdeto 2

Irdeto?

Taggar för det här ämnet

Behörigheter för att posta

stöd oss

Följ oss