yes men det gäller bara 0078an .men till allas glädje så jobbar mr GARYOPA på en en ny software även till den här vertionen, så jag tvilar på att den e låst
här e en kopia skrivit av han själv.
#1: You can only get the drive into Mode B using any of Slax CD's that work on the other Hitachi drives,
You CAN NOT use the external "cross-wire" or "Team-X" or "Xeno" connect kits to get into Debug.
#2: Once in Mode B, currently you can only see the drive in Windows, there is STILL NO DIRECT software
which allows you to read or dump or write the firmware via Windows, or Dos, or Linux.
#3: There is Maximus tool called "Firmware Tool Box v2.0" which can handle the new variable KEY placement
and encrypt and decrypt the firmware, BUT only after you have removed the chip use an external programmer.
#4: There is also a Xtreme version of "Firmware" for the v78 drive (currently v1.6) but it only works if you first
of course again, remove the chip and read it, and find your drive key, and then insert it into the v1.6 firmware
and then encrypt it and then program a compatible chip and re-solder that chip back onto your v78 drive.
#5: I personally do have a v78 drive now, thanks to some loyal UK customers that have shipped me one at their cost.
#6: I am working on "software" versions of new tools which will be able to dump and then later write the firmware