DM800 Cardserver till Ett DM800 Hemma Net.....

[beson]

Puh, that was ouite a long config....

Try this config instead, and notice I'm not using newcamd protocol on clientbox, but oscam instead, and [cs378x] protocol.

So also install oscam on clientbox, and delete mgcamd.

Serverbox
oscam.conf

[global]
logfile       = /oscam.log
maxlogsize    = 500
nice          = -1
WaitForCards  = 1
preferlocalcards = 1
saveinithistory =  1

[webif]
httpport      = 8888
httpuser      =     
httppwd       = 
httpallowed   = 127.0.0.1,192.168.1.10-192.168.1.255

[cs378x]
port          = 12345@0B00:000000

[dvbapi]
enabled          = 1
user          = server
au            = 1

oscam.server

[reader]
label                = comhem
enable              = 1
protocol            = internal
detect                = cd
device                = /dev/sci0
cardmhz             = 500
mhz                 = 500
au                  = 1
EMMCache            = 1,1,2
group                = 1
caid                = 0B00

oscam.user

[account]
user = server
pwd  = server
group = 1
au = 1 
caid = 0B00
ident = 0B00:000000

[account]
user = client
pwd  = client
group = 1
au = 1 
caid = 0B00
ident = 0B00:000000

Clientbox
oscam.conf

[global]
logfile       = /oscam.log
maxlogsize    = 500
nice          = -1
WaitForCards  = 1
preferlocalcards = 1
saveinithistory =  1

[webif]
httpport      = 8888
httpuser      =     
httppwd       = 
httpallowed   = 127.0.0.1,192.168.1.10-192.168.1.255

[cs378x]
port          = 12345@0B00:000000

[dvbapi]
enabled          = 1
user          = client
au            = 1

oscam.server

[reader]
label    = comhem
protocol = cs378x
device   = 192.168.0.14,12345
user     = client
password = client
caid     = 0B00
group    = 1
au       = 1

beson

[spacecake]

I understand OK here ya go I check the link but still cant get to work Im sure the answer is in this error :

2012/08/08 00:02:49 58C790 r lower [conax] user2 emmtype=shared, len=130, idx=40, cnt=1: written (108 ms)
2012/08/08 00:03:00 58C790 r lower [conax] user2 emmtype=shared, len=130, idx=41, cnt=1: written (109 ms)
2012/08/08 00:03:04 59DF00 c user2 (051C&44DE79/0000/051C/4C:5EF5): rejected caid (1 ms) (0/0/0/0) (invalid caid 51c)
2012/08/08 00:03:07 59DF00 c user2 (0455&FEE66C/0000/0455/4C:62FF): rejected caid (1 ms) (0/0/0/0) (invalid caid 455)
2012/08/08 00:03:13 58C790 r lower [conax] user2 emmtype=shared, len=130, idx=42, cnt=1: written (108 ms)
2012/08/08 00:03:15 58C790 r lower [conax] user2 emmtype=shared, len=130, idx=37, cnt=2: written (110 ms)

The Invaild caid ......I googled but cant find answer

Here The files ...

root@dm800:/# more /etc/tuxbox/config/oscam-experimental/oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...oscam.conf.txt

[global]
disablelog = 0
disableuserfile = 1
logfile = /oscam.log
usrfileflag = 0
clienttimeout = 5
fallbacktimeout = 2500
serialreadertimeout = 1500
clientmaxidle = 120
dropdups = 1
failbantimE = 0
bindwait = 120
nice = -1
maxlogsize = 10
waitforcards = 1
waitforcards_extra_delay = 3000
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_reopen_mode = 1
lb_reopen_seconds = 6
lb_retrylimit = 1600

[monitor]
port = 16500
monlevel = 4
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08

---------------------------------------------------------------------

# oscam.conf generated automatically by Streamboard OSCAM 1.00-svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...oscam.conf.txt

[global]
disablelog = 0
disableuserfile = 1
logfile = /oscam.log
usrfileflag = 0
clienttimeout = 5
fallbacktimeout = 2500
serialreadertimeout = 1500
clientmaxidle = 120
dropdups = 1
failbantimE = 0
bindwait = 120
nice = -1
maxlogsize = 10
waitforcards = 1
waitforcards_extra_delay = 3000
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_reopen_mode = 1
lb_reopen_seconds = 6
lb_retrylimit = 1600

[monitor]
port = 16500
monlevel = 4
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08

--More-- (56% of 1432 bytes)
root@dm800:/# vi /etc/tuxbox/config/oscam-experimental/oscam.user

# is needed for au

[account]
user = user2
pwd = pass2
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
au = 1
caid = 0B00
ident = 0B00:000000



[account]
user = dvbapiau
pwd =
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19
# put all reader groups otherwise you not have ecm from the non included group.
uniq = 3
monlevel = 0
au = 1

# for using mpcsmon

[account]
user = usermonitor
pwd = pasword
disabled = 0
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,19,19,20 ,21
uniq = 1
sleep = 0
monlevel = 4

--------------------------------------------------------------------------

root@dm800:/# more /etc/tuxbox/config/oscam-experimental/oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn build #5630
# Read more: http://streamboard.gmc.to/oscam/brow...cam.server.txt

[reader]
label = lower
enable = 1
protocol = internal
device = /dev/sci0
detect = cd
mhz = 500
cardmhz = 500
caid = 0B00
ident = 0B00:000000
services =
group = 1
emmcache = 1,3,15
lb_weight = 100
cccreshare = 3
audisabled = 0


--------------------------------------------------------------------------------

CLIENT

root@dm500 ~ # more /var/tuxbox/config/newcamd/newcamd.conf
EMU = yes
PREFER_EMU = yes
AU = yes
# OSD
OSD_TIMEOUT = 0
OSD_WEB_LOGIN = root:dreambox
SHOW_ALL_CA_SYSTEMS = no
DEBUG_ECM = yes
DEBUG_EMM = no
DEBUG_CWS = yes
DEBUG_CAM = yes
SHOW_PAT = no
SHOW_PMT = no
SHOW_ECM = no
SHOW_CAT = no
SHOW_EMM = no
SHOW_CWS_ECM = no
SHOW_CWS_EMM = no
EMM_REPORT_WRONG_SIG = no
DEFAULT_CW_DELAY = 0
RELOAD_CONFIG_ON_ZAP = yes
RELOAD_KEYLIST_ON_ZAP = no
CA_INFO_FILE = /tmp/cainfo.txt
#
CWS = 192.168.0.14 35000 user2 pass2 0102030405060708091011121314
#
CWS = uds 0 local local
CWS_MULTIPLE = 127.0.0.1 10000:10001 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan cardserver
CWS_CONNECT_TIMEOUT = 20
CWS_INCOMING_PORT = 12000
CWS_DEBUG_PORT = 12001
CWS_KEEPALIVE = no
ADMIN_PASSWORD = secret 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Thanks for the time and help .....

\\S.

[spacecake]

Nice One Benson Sorry I posted last before I read this I try now Finger crossed

\\S.

[spacecake]

Sorry Now have I did what ya said but now have probs to install OSCAM Cant find under blue button .....Manual install ? checked downloads cant seem to find it

\\S.

[beson]

Step one is to make your server working properly.
Then you can start to config your clientbox.

beson

[Volvo3]

His server config IS correct, the client sends crap! The caid's received by the server is not event the same!

[beson]

Sorry Now have I did what ya said but now have probs to install OSCAM Cant find under blue button .....Manual install ? checked downloads cant seem to find it

\\S.

I don't know what img your'e using, but with OpenPli you can dl and install cams from plugins menu.

I would suggest that you start from the beginning, and make proper installations of img (OpenPli), oscam and config files.

beson

[Minime]

His server config IS correct, the client sends crap! The caid's received by the server is not event the same!

I would not be so sure that the server config is correct, as he/she has specifyed 19 diffrent groups for some stupid reason...
and he/she only has one reader in his/her oscam.server config
And if looking att the oscam.conf file...there is alot of crap in that file that one can remove....

And why use newcamd.conf for his/her clients if he/she is using mgcamd...use newcamd.list instead and delete all newcamd.conf files....
unless he/she is using a very damn old version of mgcamd...if so upgrade mgcamd to mgcamd-1.35a

[spacecake]

His server config IS correct, the client sends crap! The caid's received by the server is not event the same!

Thanks Volvo3 can you please explain "The caid's received by the server is not event the same"

Thanks

\\S.

[spacecake]

Hi There,

Sorry I am not sure what or why so many groups ?

The images I use are for server :

OpenEmbedded Linux dm800

Openpli 2.1 dm800

And the client is :

PLi dm500 Jade 20090627 (based on 1.09)
welcome on your dreambox! - Kernel 2.6.9 (12:08:16).

Please feel free to let me know what images to use ?

Here is a PS of the server :

root@dm800:~# ps
PID USER VSZ STAT COMMAND
1 root 1740 S init [3]
2 root 0 SWN [ksoftirqd/0]
3 root 0 SW< [events/0]
4 root 0 SW< [khelper]
5 root 0 SW< [kthread]
6 root 0 SW< [kblockd/0]
7 root 0 SW< [khubd]
8 root 0 SW [pdflush]
9 root 0 SW [pdflush]
10 root 0 SW< [kswapd0]
11 root 0 SW< [aio/0]
12 root 0 SW< [ata/0]
13 root 0 SW< [ata_aux]
14 root 0 SW< [scsi_eh_0]
15 root 0 SW [mtdblockd]
16 root 0 SWN [jffs2_gcd_mtd3]
53 root 0 SW [kcdfsd]
56 root 0 SW< [cifsoplockd]
57 root 0 SW< [cifsdnotifyd]
75 root 0 SW [b_event]
76 root 0 SW [b_idle]
91 root 0 SW< [fp]
94 root 0 SW< [mpeg]
105 root 0 SW< [dmx0]
110 root 0 SW< [dmx1]
115 root 0 SW< [dmx2]
120 root 0 SW< [dmx3]
121 root 0 SW< [dmx_hw_sec]
194 root 1952 S /usr/bin/wdog tpmd
195 root 4484 S tpmd
314 root 3244 S udhcpc -R -b -H dm800 -p /var/run/udhcpc.eth0.pid -i
323 daemon 1724 S /sbin/portmap
327 root 4932 S /usr/bin/oscam-experimental -b -r 2 -c /etc/tuxbox/c
328 root 15444 S < /usr/bin/oscam-experimental -b -r 2 -c /etc/tuxbox/c
371 messageb 2724 S /usr/bin/dbus-daemon --system
382 root 2376 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_hos
385 root 3608 S /usr/sbin/inetd
388 root 13644 S /usr/sbin/smbd
390 root 13644 S /usr/sbin/smbd
391 root 6944 S /usr/sbin/nmbd
394 root 3308 S /sbin/syslogd -n -C64 -m 20
396 root 3244 S /sbin/klogd -n
406 avahi 3468 S avahi-daemon: running [dm800.local]
407 avahi 3468 S avahi-daemon: chroot helper
417 root 22708 S /usr/bin/evocamd
420 root 3244 S /bin/sh /usr/bin/enigma2.sh
425 root 74264 S /usr/bin/enigma2
438 root 0 SW< [kdvb-ad-0-fe-0]

Thanks in advance ........

\\S.

PS. I am a guy